|
||||||
|
|
|
|
|
|
|
|
CHEM-REZ - (EPOXY)
PRODUCT
Chem-Rez Epoxy is suitable for high solids potting/casting or 100% coating system applications.
End-Use Applications: - Excellent water resistance
- Good overall chemical resistance
- Toughness, flexibility, and distensibility
- Excellent corrosion resistance
- Superior adhesion
- Easily pigmented
- Physical properties may be varied by selection of resin/hardener ratio
- Epoxy/Cycloaliphatics are relatively non-toxic and are not classified as skin sensitizers.
CHEM-REZ UNPIGMENTED POTTING/CASTING:
| KGS | LITRES | |
| PART A - Epoxy Resin | 453.6 | 400 |
| PART B - Catalyst (Cycloaliphatic) | 192.8 | 200 |
| TOTAL (Parts A & B) | 646.4 | 600 |
PHYSICAL CONSTANTS
| Non-Volatile Content % | 100.00 |
| Epoxy/Hardener Ratio | 100/50 |
| Density, lb/gal, 25o C (77o F) | 9.49 |
| Pot Life, hr:min, 25o C (77o F) | 1:50 |
| Viscosity, 25o C (77o F) | 4,550 - 6,600 |
| (Parts A & B) CPS |
PERFORMANCE
| Substrate | Steel |
| Cure Schedule | 7 days at 25o C (77o F) and 50% RH |
| Film Thickness, mils | 3.5 |
|
Dry time, hr:min.:set-to-touch |
>7:00 |
| Dry time, hr:him:paper free | 24:00 |
| Flexibility, 1/8 in. mandrel | Pass |
| Adhesion | Fair |
| Resistance at 25o C (77o F), to Water, 7 days | No effect |
| MIBK, 7 days | Slight film softening |
| 10% NaOH | No effect |
| 10% HCI, 7 days | No. 9 blisters, few |
CHEMTRON WARRANTS THAT THIS PRODUCT CONFORMS TO THE CHEMICAL DESCRIPTION CONTAINED IN THE PRODUCT TECHNICAL BROCHURE. NO STATEMENTS OR RECOMMENDATIONS CONTAINED THEREIN ARE TO BE CONSTRUED AS INDUCEMENTS TO INFRINGE ANY RELEVANT PATENT, NOW OR HEREAFTER IN EXISTENCE. NO OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANT ABILITY AND OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY TO THIS UNIT. CHEMTRON NEITHER ASSUMES NOR AUTHORIZES ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR IT ANY OBLIGATION OR LIABILITY OTHER THAN SUCH AS IS EXPRESSLY SET FORTH HEREIN. UNDER NO CIRCUMSTANCES SHALL CHEMTRON BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT.