Polybond Pro

SECTION TWO – HAZARDOUS INDENTIFICATION

OSHA REGULATORY STATUS This material is not considered hazardous by the OSHA Hazardous Communication Standard(29 CFR 1910.1200)
PRINCIPLE ROUTES OF EXPOSURE Eye contact, Skin contact, Inhalation, ingestion
ACUTE TOXICITY EYES: May cause slight irritationSKIN: May cause irritationINHALATION: May cause irritationINGESTION: May cause stomach discomfort

CHRONIC EFFECTS:

CHRONIC TOXICITY Repeated or prolonged skin contact may cause skin irritation or dermatitis and sensitization of susceptible person
AGGRAVATED MEDICAL CONDITION None known

 

SECTION THREE – PHYSICAL DATA & CHEMICAL PROPERTIES

 APPEARANCE  Yellow  PHYSICAL STATE Liquid
 ODOR  Mild  pH  4.0-6.0
 FLASH POINT  Not applicable  AUTOIGNITION TEMPERATURE  Not applicable
 BOILING POINT  Not applicable  MEETING POINT/RANGE  Not applicable
 FREEZING POINT Not applicable  FLAMMABILITY LIMITS IN AIR  Not applicable
 EXPLOSION LIMITS  Not applicable  SPECIFIC GRAVITY  1.08
 VISCOSITY  4,500-5,500cps  VOC CONTENT <50g/l

 

SECTION FOUR – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY:
PRODUCT INFORMATION:  Product does not present an acute toxicity hazard based on known or supplied information
IRRITATION: Repeated or prolonged exposure may cause irritation of eyes and skin

CHRONIC TOXICITY:
CHRONIC TOXICITY: Repeated or prolonged skin contact may cause skin irritation or /and dermatitis and sensitization of susceptible persons
CARCINOGENICITY: Contains no ingredient listed as a carcinogen

 

SECTION FIVE – FIRST AID MEASURES

EYE CONTACT: Rinse immediately with plenty of water, also under the eyelids , for at least 15 minutes. Get medical attention immediately if irritation persists.
SKIN CONTACT: Wash skin with soap and water. Get medical attention if irritation develops and persists
INHALATION: None under normal use. Move to fresh air.
INGESTION: Do not induce vomiting. Clean mouth with water and afterwards drink plenty of water. Never give anything by mouth to an unconscious person . Get medical attention.

NOTE TO PHYSICIAN: Treat symptomatically

 

SECTION SIX – FIRE-FIGHTING MEASURES

FLAMMABLE PROPERTIES: NOT FLAMMABLE
SUITABLE EXTINGUISHING MEDIA: Water spray. Dry chemical. Carbon dioxide foam
HAZARDOUS COMBUSTION PRODUCTS : Carbon oxides
PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS:As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH(approved or equivalent) and full protective gear.

 

SECTION SEVEN – EXPOSURE CONTROLS/PERSONAL PROTECTION

EXPOSURE GUIDELINES: This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies
ENGINEERING MEASURES: ShowerEyewash station Ventilation systems
EYE/FACE PROTECTION: Eye protection
SKIN AND PROTECTION: Wear protective gloves/clothing
RESPIRATORY PROTECTION: If exposure limits are exceeded or irritation is experience NIOSH/MSHA approved respiratory protection should be worn
HYGIENE MEASURES: Handle in accordance with good industrial hygiene and safety practice

 

SECTION EIGHT – ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Wear protective gloves/clothing and eye/face protection
METHODS FOR CONTAINMENT: Absorb spill with inert material(e.g. dry sand or earth), then place in a chemical waste container. Dike to collect large liquid spills
METHOD FOR CLEANING UP: Pick up and transfer to properly labelled containers

 

SECTION NINE – STABILITY AND REACTIVITY

STABILITY: Stable under recommended storage conditions
INCOMPATIBLE PRODUCTS: Strong oxidizing agents
CONDITION TO AVOID: Do not freeze. Extremes of temperature and direct sunlight
HAZARDOUS DECOMPOSITION PRODUCTS : Carbon oxides
HAZARDOUS REACTIONS: Hazardous polymerization does not occur

 

SECTION TEN – HANDLING AND STORAGE

HANDLING: Handle in accordance with good industrial hygiene and safety practice
STORAGE: Keep containers tightly closed in a cool, well-ventilated place. Keep from freezing. Keep cool and protect from sunlight.

The information in this Material Safety Data Sheet relates only to the specific material designated herein and does not relate to use in combination with any other material or any process. Customers are encouraged to conduct their own tests. Before using any product, read its’ label.